
Whole-home year-round comfort for small to medium homes — variable-speed inverter heating and cooling that never stops adapting. The Goodman GZV6SA2410 delivers 2-ton, up to 16.2 SEER2 / 8.2 HSPF2 heating and cooling from one premium Ivory White side-discharge unit. The inverter swing compressor never runs at a fixed speed — it finds the perfect output for every moment, eliminating the uncomfortable cycling, excessive noise, and wasted energy of conventional heat pumps. Operates in heating mode down to -10°F with 14,200 BTU/h of heating capacity even at 5°F — delivering reliable warmth in cold conditions that challenge standard heat pumps.
Why Homeowners and Contractors Choose the GZV6SA2410:
- Up to 16.2 SEER2 cooling efficiency — premium variable-speed efficiency for lower summer bills
- Up to 8.2 HSPF2 heating efficiency — efficient heat pump heating for lower winter electric bills
- 2 Ton / 23,200 BTU/h cooling / 23,200 BTU/h heating — ideal for small to medium homes between 1,000–1,200 sq ft
- Variable-speed inverter swing compressor — Variable / Infinite Stage — infinite modulation between minimum and maximum output for exact year-round temperature control
- Selectable Quiet Mode — as low as 45 dBA — quieter than most conventional heat pumps
- Field-selectable Boost Mode — maximum output during peak demand
- Heating operation down to -10°F (-23°C) — wider operating range than standard heat pumps
- Heating at 5°F: 14,200 BTU/h — reliable heating output in extreme cold conditions
- Electronic Expansion Valve (EEV) — precise refrigerant management in both modes
- Auto-control superheat management
- Side discharge design — flexible installation for constrained spaces
- Custom Ivory White cabinet — distinctive premium appearance
- All Regions designation — approved for all US climate zones
- ComfortNet compatible — smart system integration
- Only two low-voltage wires in communicating mode
- Compatible with Goodman GTST Connected Thermostat
- Proprietary 7-segment LED display with fault code storage
- Proprietary Inside Intelligence diagnostics
- Digitally commutated condenser fan motor (0.09 HP)
- High-density compressor sound blanket
- Coil and ambient temperature sensors + suction pressure transducer
- Front-sealing service valves with easy-access gauge ports
- Factory charged for 15 ft of ⅜" liquid line
- ZAM® steel bottom frame and legs
- Heavy-gauge galvanized-steel Ivory White cabinet — 500-hour salt-spray tested
- Hurricane-ready construction — meets 2023 Florida Building Code
- R-32 refrigerant — one-third lower GWP than R-410A
- AHRI Certified and ETL Listed
- Made in the USA
⚠️ Side discharge — review installation manual. Communicating system — GTST thermostat required. R-32 — compatible indoor unit with RDS required. Field-installed bi-flow filter drier required. Backup heat recommended below -10°F.
Specs:
- Tonnage: 2 Ton
- Max Cooling: 23,200 BTU/h @ 95°F
- Max Heating @ 47°F: 23,200 BTU/h
- Max Heating @ 5°F: 14,200 BTU/h
- SEER2: Up to 16.2
- HSPF2: Up to 8.2
- Compressor: Variable-Speed Inverter Swing (Variable / Infinite Stage)
- Refrigerant: R-32
- Expansion Device: EEV
- Fan Motor: Digitally Commutated (0.09 HP)
- Voltage: 208/230V — 1Ph — 60Hz
- MCA: 16.8 Amps
- Max Breaker (MOP): 20 Amps
- Liquid Line: ⅜" O.D.
- Suction Line: ¾" O.D.
- Refrigerant Charge: 74 oz
- Heating Range: -10°F to 70°F
- Cooling Range: 0°F to 115°F
- Cabinet: Custom Ivory White — Side Discharge
- Unit Weight: 122 lbs
- Region: All Regions
- Operation: Heating + Cooling
Warranty: 10-year unit replacement + 10-year parts warranty with online registration within 60 days.
-