Goodman 3 Ton 17.2 SEER2 8.2 HSPF2 Two-Stage Heat Pump Condenser ComfortBridge R-32

Year-round premium efficiency for medium to large homes — Goodman's best heat pump technology in the most popular size. The Goodman GLZT7CA3610 delivers 3-ton, 17.2 SEER2 / 8.2 HSPF2 two-stage heating and cooling from one premium outdoor unit. With its two-stage Copeland UltraTech scroll compressor, integrated ComfortBridge™ communicating technology, CoolCloud™ Bluetooth commissioning and diagnostics, and diagnostic indicator lights with storage of six fault codes, this is the most intelligent and most efficient 3-ton heat pump condenser Goodman makes. 

Why Homeowners and Contractors Choose the GLZT7CA3610:

• 17.2 SEER2 cooling efficiency — approximately 25% more efficient than the federal minimum
• 8.2 HSPF2 heating efficiency — significant savings over standard electric resistance heating
• 3 Ton / 36,000 BTU capacity — ideal for medium to large homes between 1,500–1,800 sq ft
• Two-stage Copeland UltraTech scroll compressor — low-speed operation for quieter, more efficient year-round performance
• Superior active dehumidification — two-stage operation removes more moisture for whole-home comfort
• SmartShift® time-delay defrost technology — quiet, smooth, reliable defrost transitions
• ComfortBridge™ communicating technology — self-optimizing system intelligence
• CoolCloud™ Bluetooth app — smartphone commissioning and diagnostics
• Copeland® ComfortAlert™ diagnostics — proactive compressor protection
• Compatible with Goodman GTST Connected Thermostat
• Diagnostic indicator lights with storage of 6 fault codes
• Color-coded terminal strip for non-communicating setup
• Efficient two-speed ECM condenser fan motor
• High-density foam compressor sound blanket
• Copper tube / enhanced aluminum fin coil (5mm)
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• High and low-pressure safety switches
• Factory-installed transformer
• Ambient temperature sensors
• R-32 refrigerant — one-third lower GWP than R-410A
• Factory pre-charged for 15 ft of tubing
• Easy-access gauge ports and service valves with sweat connections
• Steel louver coil guard with rust-resistant coated screws
• Top and side maintenance access panels
• Heavy-gauge galvanized-steel cabinet with Architectural Gray powder-coat finish — 500-hour salt-spray approved
• Hurricane-ready construction — meets 2020 Florida Building Code requirements
• AHRI Certified and ETL Listed
• Made in the USA

⚠️ R-32 refrigerant requires compatible indoor equipment with RDS. TXV required. Backup heat source recommended for extreme cold.

Specs:

• Tonnage: 3 Ton (36,000 BTU)
• SEER2: Up to 17.2
• HSPF2: Up to 8.2
• Refrigerant: R-32
• Compressor: Two-Stage Copeland UltraTech Scroll
• Fan Motor: Two-Speed ECM
• Coil: 5mm Copper Tube / Enhanced Aluminum Fin
• Voltage: 208/230V — 1Ph — 60Hz
• MCA: 18.4 Amps
• Max Breaker (MOP): 25 Amps
• Operation: Heating + Cooling
• Certifications: AHRI, ETL

Warranty: 10-year limited parts warranty with online registration within 60 days of installation.