• Goodman 2.5 Ton 14 SEER2 R-32 Air Conditioner + 80,000 BTU 80% AFUE Single-Stage Gas Furnace System - Upflow
  • Goodman GLXS3BN3010 + CAPTA3026B3 + GR9S800803BN matched system
  • Goodman cond GLXS3BN3010
  • Goodman coil CAPTA3026B3
  • Goodman furn GR9S800803BN
  • Goodman 10 Year Warranty information label
  • Northern States Energy Guide 13.4 SEER2
  • Goodman Made in the USA
  • Goodman assembly line
1 9
In stock Ships in 1-2 business days

Goodman 2.5 Ton 14 SEER2 AC Paired With 80K Btu Furnace

Model: GLXS3BN3010 / CAPTA3026B3 / GR9S800803BN

$3,936.00
$3,936.00
Sale Sold out
Free Shipping Free Shipping
$ Price Match $ Price Match
Ships in 1-2 Business Days Ships in 1-2 Business Days
Delivers in 1-5 Business Days Delivers in 1-5 Business Days
View full details

  • Complete year-round climate control for 1,500 to 2,000 square foot homes comes from the matched Goodman GLXS3BN3010 condenser, CAPTA3026B3 cased evaporator coil, and GR9S800803BN gas furnace. This split-system package delivers 30,000 BTU of cooling at 14 SEER2 efficiency and 80,000 BTU of heating at 80% AFUE, engineered specifically for vertical upflow forced-air ductwork.

    R-32 refrigerant operates inside the single-stage scroll compressor with a significantly lower global warming potential than older blends, satisfying current EPA Phase 3 regulations. The copper-tube and aluminum-fin condenser resists environmental degradation behind a louvered, powder-coated steel shell. Inside the paired indoor section, a factory-installed thermostatic expansion valve and 17.5-inch cabinet frame balance static pressure for consistent supply air delivery.

    Contractors and retrofit homeowners choose this assembly for its integrated component specification:

    • CAPTA3026B3 cased coil mates directly with the GLXS3BN3010 outdoor unit, streamlining field installation and preventing refrigerant mismatch errors.
    • GR9S800803BN furnace employs a multi-speed ECM blower that adjusts rotational speed to stabilize room temperatures while minimizing fan noise during both heating and cooling cycles.
    • An aluminized-steel tubular heat exchanger incorporates a self-diagnostic control board that monitors system status and records fault codes for rapid technician diagnosis.
    • Built-in high- and low-pressure switches plus a permanent factory filter drier protect internal refrigerant lines and the compressor from damage.
    • The system ships compatible with liquid propane conversions when natural gas infrastructure is unavailable or cost-prohibitive.
    • Every major cabinet and coil component is designed, engineered, and assembled in the United States with corrosion-resistant finishes.

    Replacing end-of-life equipment requires proper Manual J load calculations, but this paired 2.5-ton setup aligns with standard mid-size residential zoning. Activate the 10-year limited parts warranty by registering the hardware online within 60 days of professional commissioning. If your property relies on vertical duct distribution, this Goodman combination manages seasonal thermal loads without overcrowding standard mechanical closets.

  • Free Shipping on All HVAC Orders Plus a 10-Year Warranty

    Warranty

    Enjoy a 10-year limited parts warranty when you register your unit within 60 days of installation. A properly certified professional must complete the installation in compliance with city, state, and federal laws.

    Processing Time

    We process and ship orders Monday through Friday. Orders placed by 12 p.m. EST on these days are usually shipped within 1 to 2 business days and arrive within 3 to 5 business days. Orders placed on weekends will start processing the next business day. Some items may be backordered, leading to possible delays. Shipping times begin once the order leaves our warehouse. While we aim for timely delivery, delays by freight or ground carriers are beyond our control. FREE Life Gate.

    Equipment Arrival

    Shipping times are not guaranteed and may vary by address. Upon delivery, inspect each item and match the count with the delivery receipt before signing. Report any missing or incorrect items within 24 hours; claims reported after this period may be denied. Inspect items for damage in front of the driver before signing the receipt. Note any issues like dents or scratches clearly on the receipt or reject the shipment if damaged.

    Making Notes on the Delivery Receipt

    If the items and quantity on the delivery receipt match what you received and are undamaged, sign and mark the receipt as “Clear.”

    If items or boxes are missing, mark the receipt as "Short" and list the missing items. We will ship replacements to you at no extra charge. If the strip wrap is torn or replaced, mark the receipt as "Wrap Broken."

    How Do I Handle a Damaged Shipment?

    If any items are damaged, mark the receipt as "Damaged", specifying the items and the nature of the damage. Refuse only the damaged items, keep and sign for the rest, and clearly note the refused items on the receipt. Contact our Customer Service to report which items were refused and which were accepted. We will ship replacements once our Shipping Department confirms the damage with the Freight LTL Company. If you sign for the delivery but later discover damage, you are responsible for it. You will need to contact the Freight LTL Company™ claims department directly to file a claim.