• Goodman 2.5 Ton 14 SEER2 R-32 Air Conditioner + 80,000 BTU 80% AFUE Single-Stage Gas Furnace System - Horizontal
  • Goodman GLXS3BN3010 + CHPTA3630B3 + GR9S800803BN matched system
  • Goodman cond GLXS3BN3010
  • Goodman coil CHPTA3630B3
  • Goodman furn GR9S800803BN
  • Goodman 10 Year Warranty information label
  • Northern States Energy Guide 13.4 SEER2
  • Goodman Made in the USA
  • Goodman assembly line
1 9
In stock Ships in 1-2 business days

Goodman 2.5 Ton Seer2 Ac Pair With 80K Btu Gas Furnace Horizontal

Model: GLXS3BN3010 / CHPTA3630B3 / GR9S800803BN

$3,939.00
$3,939.00
Sale Sold out
Free Shipping Free Shipping
$ Price Match $ Price Match
Ships in 1-2 Business Days Ships in 1-2 Business Days
Delivers in 1-5 Business Days Delivers in 1-5 Business Days
View full details

  • Deliver reliable year-round climate control for homes between 1,500 and 2,000 square feet with the Goodman 2.5 Ton 14 SEER2 Air Conditioner and 80,000 BTU Single-Stage Gas Furnace bundle. This matched indoor-outdoor system eliminates equipment mismatch risk by pairing the GLXS3BN3010 outdoor condenser, CHPTA3630B3 horizontal evaporator coil, and GR9S800803BN gas furnace into a single coordinated package designed for standard forced-air ductwork.

    Cooling Performance and Refrigerant Compliance

    The 2.5-ton outdoor unit delivers 30,000 BTU of cooling through a single-stage scroll compressor and copper tube aluminum fin coils protected by a powder-coated louvered cabinet. The system runs on R-32 refrigerant, meeting current EPA phase-down requirements with a lower global warming potential than older R-410A configurations. High- and low-pressure safety switches plus a factory-sealed filter drier shield the compressor from liquid slugging and restriction damage.

    Steady Heating and Quiet Airflow

    The accompanying 80,000 BTU gas furnace operates at 80 percent AFUE, utilizing a single-stage gas valve and an aluminized-steel tubular heat exchanger. Temperature consistency across multiple rooms is handled by a multi-speed ECM blower that modulate fan speeds to reduce cycle noise and prevent hot or cold spots. A built-in self-diagnostic control board flags ignition or limit errors without external diagnostic testers.

    • Layout Compatibility: Horizontal design accommodates tight attic, crawlspace, or closet installations
    • Alternative Fuel: Standard R-32 configuration converts to propane with an optional LP kit
    • Indoor Air Section: 17.5-inch deep cased coil houses a factory TXV for precise refrigerant metering
    • Domestic Construction: Components engineered and assembled in the United States

    Complete system coverage includes a 10-year parts limited warranty provided the registration submits online within 60 days of professional installation. Square footage estimates vary with regional humidity, attic insulation R-values, and solar load, so a certified HVAC specialist should complete Manual J load calculations before final procurement.

  • Free Shipping on All HVAC Orders Plus a 10-Year Warranty

    Warranty

    Enjoy a 10-year limited parts warranty when you register your unit within 60 days of installation. A properly certified professional must complete the installation in compliance with city, state, and federal laws.

    Processing Time

    We process and ship orders Monday through Friday. Orders placed by 12 p.m. EST on these days are usually shipped within 1 to 2 business days and arrive within 3 to 5 business days. Orders placed on weekends will start processing the next business day. Some items may be backordered, leading to possible delays. Shipping times begin once the order leaves our warehouse. While we aim for timely delivery, delays by freight or ground carriers are beyond our control. FREE Life Gate.

    Equipment Arrival

    Shipping times are not guaranteed and may vary by address. Upon delivery, inspect each item and match the count with the delivery receipt before signing. Report any missing or incorrect items within 24 hours; claims reported after this period may be denied. Inspect items for damage in front of the driver before signing the receipt. Note any issues like dents or scratches clearly on the receipt or reject the shipment if damaged.

    Making Notes on the Delivery Receipt

    If the items and quantity on the delivery receipt match what you received and are undamaged, sign and mark the receipt as “Clear.”

    If items or boxes are missing, mark the receipt as "Short" and list the missing items. We will ship replacements to you at no extra charge. If the strip wrap is torn or replaced, mark the receipt as "Wrap Broken."

    How Do I Handle a Damaged Shipment?

    If any items are damaged, mark the receipt as "Damaged", specifying the items and the nature of the damage. Refuse only the damaged items, keep and sign for the rest, and clearly note the refused items on the receipt. Contact our Customer Service to report which items were refused and which were accepted. We will ship replacements once our Shipping Department confirms the damage with the Freight LTL Company. If you sign for the delivery but later discover damage, you are responsible for it. You will need to contact the Freight LTL Company™ claims department directly to file a claim.